Fujitsu Eternus web GUI - Page 559

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
559
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
Selected: Notify
Cleared: Not notify
Selected (fixed): Always notify (This setting cannot be changed with this function.)
–: Not applicable to notification
11.2.7.2 Display/Delete Event Log
This function displays the event history of the ETERNUS DX Disk storage system.
The event log is one of the internal logs stored in the ETERNUS DX Disk storage system. The
event log contains a history of events that are related to configuration information changes, such
as module failures and volume creation.
Up to 1600 (400 per CM-CPU) event logs can be displayed. Once the recorded event log is no
longer required, it can also be deleted.
Warning
Parts Warning Cleared * Cleared
*
Cleared
*
Cleared Selected
(fixed)
Disk
Warning
Any Time Cleared * Cleared
*
Cleared
*
Cleared Selected
(fixed)
when
HS<0
Cleared Cleared Cleared Cleared –
Temperature Warning Cleared * Cleared
*
Cleared
*
Cleared Selected
(fixed)
Battery life Warning Cleared * Cleared
*
Cleared
*
Cleared Selected
(fixed)
Informational
Recovery module – Cleared Cleared Cleared –
Temperature restoration – Cleared Cleared Cleared –
User login/logout – Cleared Cleared Cleared –
Operated RAID Group – Cleared Cleared Cleared –
Added/Released Hot
Spare
– Cleared Cleared Cleared –
Operated Volume – Cleared Cleared Cleared –
Power off/on CFL – Cleared Cleared Cleared –
SDP Usage Rate Over
Lv1
– Cleared Cleared Cleared –
SDP Usage Rate Over
Lv2
– Cleared Cleared Cleared –
SDP Usage Rate Over
Lv3
– Cleared Cleared Cleared –
Copy Table Size Usage
Rate Over
– Cleared Cleared Cleared –
Trial copy license
expired
– Selected Selected Cleared –
Level Event Notification method
Host Sense
Key Code
Qualifier
SNMP
Trap
E-Mail syslog REMCS