Fujitsu Eternus web GUI - Page 563

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
563
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2 Set the detailed information for exporting a log, and click the [Create Data]
button.
• Specify Time Range
To specify a time range for exporting logs, select "Yes". Select "No" if not specifying. To
export logs from the last 24 hours, select the "Last 24 hours".
• Start Time
When a time range is to be specified, specify the date and time to start exporting logs.
- YYYY-MM-DD hh:mm:ss (YYYY: Year (AD), MM: Month (01 - 12), DD: Date (01 -
31), hh: Hour (00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))
• End Time
When a time range is to be specified, specify the date and time to finish exporting logs.
- YYYY-MM-DD hh:mm:ss (YYYY: Year (AD), MM: Month (01 - 12), DD: Date (01 -
31), hh: Hour (00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))
• Include Expander log
When exporting the expander logs, select "Yes". When not exporting, select "No".
• Log File Size
Select the log file size (segment size) when saving the exported log from the following.
- Non-segmentation
- 4. 27MB
- 1. 44MB (Floppy Disk)
- 640KB (E-Mail)
• Delete of Customer Information
When deleting the customer information (information to identify the customer such as;
user name, box ID and IP address) from the exported log, select "Yes". When not
deleting, select "No".
→ A confirmation screen appears.
When clicking the [Create Data] button in the following conditions, an
error screen appears.
• When the input date and/or time are not valid (For example:
February 31st)
• When the end time is earlier than the start time