Fujitsu Eternus web GUI - Page 562

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
562
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
3 Click the [OK] button.
→ Deletion of a volume starts.
4 Click the [Done] button to return to the [Display Event Log] screen.
End of procedure
11.2.7.3 Export Log
This function exports and saves the ETERNUS DX Disk storage system maintenance informa-
tion (log) in accordance with user-specified time settings.
An exported log can be stored on a floppy disk or hard disk, or sent by E-mail.
Also, users can select a log segment size to suit the destination it is to be saved.
• The maintenance information to be exported
Log to be exported includes an "internal log" and "configuration information".
- Internal log
Detected errors, warnings, and traces
- Configuration definition information
Configuration information exported from the ETERNUS DX Disk storage system
The procedure to export log is as follows:
Procedure
1 Click [Export/Delete Log] in [Action].
• The internal log and configuration information cannot be exported
separately.
• When exporting of the log has been complete, save the log file
immediately.
• The various pieces of maintenance information are combined together,
compressed, and then segmented into the user specified segment size
before being exported.
Special tools to read these logs are required.