Fujitsu Eternus web GUI - Page 578

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
578
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
The procedure to set the date and time is as follows:
Procedure
1 Click [Modify Date and Time] in [Action].
2 Specify the parameters, and click the [Set] button.
● Date/Time Information
• Date
To change the current date and time settings, input the new values.
- YYYY-MM-DD hh:mm:ss (YYYY: Year (2001 - 2037), MM: Month (01 - 12), DD: Day
(01 - 31), hh: Hour (00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))
● Time Zone
• Time Zone
Select the Time Zone from the list box. If the appropriate Time Zone does not exist,
select "Manually".
• Time Zone (time difference setting)
When selecting "Manually" in the time zone field, specify the time difference from GMT
using [+]/[-] in hours and minutes.
- Time difference
Select "+" or "-".
- Hour
00 - 12
- Minute
00, 15, 30, 45
• When using ECO mode, make sure to set the time/date correctly.
• If the date/time of the ETERNUS DX Disk storage system is wrong,
processes for stopping and starting the disk motor cannot be performed
in accordance with the ECO mode schedule.
• When using the NTP server, the time modification method is the step
mode (modify immediately).
• When using the NTP server, the ETERNUS DX Disk storage system is
synchronized with the NTP server every three hours.