2-28 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
The following example shows output for the prtdiag command in verbose mode.
# prtdiag -v
System Configuration: xxxx Server
System clock frequency: 1012 MHz
Memory size: 262144 Megabytes
==================================== CPUs ====================================
CPU CPU Run L2$ CPU CPU
LSB Chip ID MHz MB Impl. Mask
--- ---- ---------------------------------------- ---- --- ----- ----
00 0 0, 1, 2, 3, 4, 5, 6, 7 2660 11.0 7 192
00 1 8, 9, 10, 11, 12, 13, 14, 15 2660 11.0 7 192
00 2 16, 17, 18, 19, 20, 21, 22, 23 2660 11.0 7 192
00 3 24, 25, 26, 27, 28, 29, 30, 31 2660 11.0 7 192
01 0 32, 33, 34, 35, 36, 37, 38, 39 2660 11.0 7 192
01 1 40, 41, 42, 43, 44, 45, 46, 47 2660 11.0 7 192
01 2 48, 49, 50, 51, 52, 53, 54, 55 2660 11.0 7 192
01 3 56, 57, 58, 59, 60, 61, 62, 63 2660 11.0 7 192
============================ Memory Configuration ============================
Memory Available Memory DIMM # of Mirror Interleave
LSB Group Size Status Size DIMMs Mode Factor
--- ------ ------------------ ------- ------ ----- ------- ----------
00 A 65536MB okay 4096MB 16 no 8-way
00 B 65536MB okay 4096MB 16 no 8-way
01 A 65536MB okay 4096MB 16 no 8-way
01 B 65536MB okay 4096MB 16 no 8-way
========================= IO Devices =========================
IO Lane/Frq
LSB Type LPID RvID,DvID,VnID BDF State Act, Max Name
Model Logical Path
------------
00 PCIe 0 bc, 8532, 10b5 2, 0, 0 okay 8, 8 pci-pciex10b5,8532
NA /pci@0,600000/pci@0
00 PCIe 0 bc, 8532, 10b5 3, 8, 0 okay 8, 8 pci-pciex10b5,8532
NA /pci@0,600000/pci@0/pci@8
00 PCIe 0 bc, 8532, 10b5 3, 9, 0 okay 1, 8 pci-pciex10b5,8532
NA /pci@0,600000/pci@0/pci@9
00 PCIx 0 8, 125, 1033 4, 0, 0 okay 100, 133 pci-pciexclass,060400
NA /pci@0,600000/pci@0/pci@8/pci@0
00 PCIx 0 8, 125, 1033 4, 0, 1 okay --, 133 pci-pciexclass,060400
NA /pci@0,600000/pci@0/pci@8/pci@0,1
To Next Page
Loading...
