Fujitsu SPARC Enterprise M5000

vi SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
2.4 Error Conditions 2–14
2.4.1 Predictive Self-Healing Tools 2–14
2.4.2 Monitoring Output 2–17
2.4.3 Messaging Output 2–17
2.5 LED Functions 2–18
2.6 Using the Diagnostic Commands 2–21
2.6.1 Using the showlogs Command 2–21
2.6.2 Using the fmdump Command 2–22
2.6.2.1 fmdump -V Command 2–22
2.6.2.2 fmdump -e Command 2–23
2.6.3 Using the fmadm faulty Command 2–23
2.6.3.1 fmadm repair Command 2–23
2.6.3.2 fmadm config Command 2–24
2.6.4 Using the fmstat Command 2–24
2.7 Traditional Oracle Solaris Diagnostic Commands 2–25
2.7.1 Using the iostat Command 2–26
2.7.1.1 Options 2–26
2.7.2 Using the prtdiag Command 2–27
2.7.2.1 Options 2–27
2.7.3 Using the prtconf Command 2–30
2.7.3.1 Options 2–30
2.7.4 Using the netstat Command 2–32
2.7.4.1 Options 2–33
2.7.5 Using the ping Command 2–34
2.7.5.1 Options 2–34
2.7.6 Using the ps Command 2–35
2.7.6.1 Options 2–35
2.7.7 Using the prstat Command 2–36