Fujitsu SPARC Enterprise M5000

4-16 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
This sample shows the showhardconf output continued.
Refer to the showhardconf man page for more information.
3. Type the console command to switch from the XSCF console to the ok prompt
(domain console) again:
EXAMPLE 4-7 showhardconf
DDC_A#0 Status:Normal;
DDC_A#1 Status:Normal;
DDC_A#2 Status:Normal;
DDC_A#3 Status:Normal;
DDC_B#0 Status:Normal;
DDC_B#1 Status:Normal;
IOU#0 Status:Normal; Ver:0101h; Serial:7867000395 ;
+ FRU-Part-Number:CF00541-0493 01 /541-0493-01 ;
DDC_A#0 Status:Normal;
DDCR Status:Normal;
DDC_B#0 Status:Normal;
XSCFU Status:Normal,Active; Ver:0101h; Serial:78670002628 ;
+ FRU-Part-Number:CF00541-0481 01 /541-0481-01 ;
OPNL Status:Normal; Ver:0101h; Serial:78670000878 ;
+ FRU-Part-Number:CF00541-0850 01 /541-0850-01 ;
PSU#0 Status:Normal; Serial:XF0345;3
+ FRU-Part-Number:CF00300-1898 50 /300-1898-50;
+ Power_Status:Off; AC:200 V;
PSU#1 Status:Normal; Serial:XF0346;
+ FRU-Part-Number:CF00300-1898 50 /300-1898-50;
+ Power_Status:Off; AC:200 V;
PSU#2 Status:Normal; Serial:XF03470;
+ FRU-Part-Number:CF00300-1898 50 /300-1898-50;
+ Power_Status:Off; AC:200 V;
PSU#3 Status:Normal; Serial:XF0348;
+ FRU-Part-Number:CF00300-1898 50 /300-1898-50;
+ Power_Status:Off; AC:200 V;
FANBP_C Status:Normal; Ver:0101h; Serial:7867000053 ;
+ FRU-Part-Number:CF00541-0848 01 /541-0848-01 ;
FAN_A#0 Status:Normal;
FAN_A#1 Status:Normal;
FAN_A#2 Status:Normal;
FAN_A#3 Status:Normal;
XSCF>
XSCF> console -d 0