8.1.10 Configure Win627 Super IO Chipset - M Motherboard
BIOS SETUP UTILITY VXX.xx
Main Advanced PCIPnP Boot Security Chipset Power
Other>
Configure Win627 Super IO Chipset
OnBoard Floppy Controller [Enabled]
Serial Port1 Address [3F8/IRQ4]
Instructions will appear
Serial Port2 Address [2F8/IRQ3]
in this part of the screen.
Serial Port2 Mode [Normal]
OnBoard CIR Port [Disabled]
Parallel Port Address [Disabled]
¬ ® Select Screen
¯ Select Item
+ - Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
(C) Copyright 1985-2003, American Megatrends, Inc.
8-10 Rev 3.0 90000291
TeamPoS 2000 MAINTENANCE MANUAL
To Next Page
Loading...