9.1.11 Integrated Peripherals
Factory Default Settings
ROM PCI/ISA BIOS (XXXXXXX)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode : Enabled Onboard Parrallel Port :378/IRQ7
IDE Primary Master PIO : Auto Parallel Port Mode : Normal
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto
On-Chip Primary PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support : Disabled
Onboard PnP Audio Device : Enabled
Onboard Lan Chip :Enabled
Init Display First : PCI Slot
Onboard FDC Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART2 Mode : Standard
90000291 Rev 3.0 9-9
TeamPoS 2000 MAINTENANCE MANUAL
Note: Coppermine is also referred to as 0.18mm technology. The 600MHz, 850MHz
and 1 GHz Pentium III and the 566MHz Celeron incorporate Coppermine
technology.
To Next Page
Loading...