9.1.8 Load BIOS Defaults
This feature should not be used. This feature loads minimum level values as assigned by
the BIOS supplier.
9.1.9 Load SETUP Defaults
This feature reloads all Fujitsu defined default values. If run from the main menu, this
will reload default values to all sub-menus.
If run from a sub-menu, only the values of that menu will be reloaded.
9.1.10 Clock and Sensor
Factory Default Settings
ROM PCI/ISA BIOS (XXXXXXX)
CLOCK AND SENSOR
AWARD SOFTWARE, INC.
Auto Detech DIMM/PCI Clk : Enabled
Spread Spectrum : 0.25%
CPU Host CLock (CPU/PCI) : Default
CPU Warning Temperature : Disabled
Current System Temp. : 28°C/82° F
Current CPU1 Temperature : 38°C/100° F
Current CPU FAN1 Speed : 4017 RPM
Current CPU FAN2 Speed : 4560 RPM
Current CPU FAN3 Speed : 4440 RPM
MENDOCINO:
VCore: 2.05V VTT : 1.55V
VCC3 : 3.30V
COPPERMINE:
VCore : 1.60V VTT : 1.55V
VCC3 : 3.30V
Esc: Quit ¯ ® ¬: Select Item
+12V : 12.09V -12V` : -12.11V F1: Help PU/PD/+/- : Modify
- 5V : -5.00V VBAT (V) : 3.24V F5 : Old Values (Shift) F2 : Color
5VSB (V) : 5.05V .5V : 5.00V F6 : Load BIOS Defaults
Shutdown Temperature : Disabled F7 : Load Setup Defaults
90000291 Rev 3.0 9-7
TeamPoS 2000 MAINTENANCE MANUAL
To Next Page
Loading...