5.6 Riser Card Connectors
The revised riser card (KD20033-B41X) automatically detects the settings for
TeamCOMBO and Retail I/O board or TeamUSB board.
There are two jumpers on the back side of the riser card for 5V Standby and LED Power.
The jumper settings are shown below.
LED Power 5V Standby
A or H Motherboard 1-2 1-2
M Motherboard 2-3 2-3
5-26 Rev 3.0 90000291
TeamPoS 2000 MAINTENANCE MANUAL
Note: Dashed lines are components on the opposite side. There are two riser cards:
Revised riser card, 2 PCI slots, KD20033-B41X supports TeamUSB,
TeamCOMBO and Retail I/O boards.
Original riser card, 2 PCI slots, CA21259-B21X supports Retail I/O and
TeamCOMBO only.
To Next Page
Loading...