GE LOGIQ Totus

GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
3 - 22 Section 3-5 - Completing the Setup
3-5-9 Password policies
To create password policies:
1.) Navigate to Utility > Admin > Logon.
2.) Select Enable Password Policies. The LOGIQ Totus prompts the user for a password at logon.
3.) Under Password Policies, use the drop down selection beside each feature to set the rules for
passwords.
4.) Click Save.
Figure 3-11 Policies Window