GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
3 - 14 Section 3-5 - Completing the Setup
3-5-3 Electrical specification verification
Verification of the LOGIQ Totus voltage setting
Verify that the mains voltage specified for the LOGIQ Totus is available on-site.
The voltage setting for the LOGIQ Totus is found on the rating label on the back of the LOGIQ Totus on
the lower rear frame.
CAUTION
CONNECTING A LOGIQ TOTUS TO THE WRONG VOLTAGE LEVEL WILL MOST LIKELY
DESTROY IT.
Figure 3-5 Rating Label - LOGIQ Totus