GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 5 Components and Functions (Theory) 5 - 5
5-3-3 LOGIQ Totus general description
The LOGIQ Totus is a digital beamforming Ultrasound system. The Ultrasound signal flows from the
probe through the Ultrasound system where it is processed and finally displayed as a diagnostic image
on the monitor. Images and patient data can be sent to peripheral devices to be stored, printed, or
displayed.
System configuration is stored on the hard drive and all necessary software is loaded from the hard drive
on power up.
The LOGIQ Totus is comprised of the following major components:
• UBE (Unity Back end)
• UAC (Unity Acquisition, Front end)
• UCO-T (Unity Connector)
• Operator panel
• Peripherals
• Options
• Mechanical Parts
• Software
To Next Page
Loading...
