GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 3 LOGIQ Totus Setup 3 - 13
Section 3-5
Completing the Setup
Contents in this section
3-5-1 Purpose of this section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
3-5-2 LOGIQ Totus specification verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
3-5-3 Electrical specification verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
3-5-4 Connections on the rear I/O panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
3-5-5 Connections on the patient I/O panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
3-5-6 Connecting probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
3-5-7 Power on/boot up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
3-5-8 Default security level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
3-5-9 Password policies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
3-5-10 Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
3-5-11 Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
3-5-12 Lock out and log on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
3-5-13 Disk encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
3-5-14 Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
3-5-15 Logoff/Power shut down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31
3-5-16 Complete power down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32
3-5-1 Purpose of this section
This section describes how to complete the set up of LOGIQ Totus.
3-5-2 LOGIQ Totus specification verification
Verification of the LOGIQ Totus requirements
• Verify that the site meets the requirements listed in ( Section 2-3 "Facility Needs" on page 2-9).
• Verify that the specifications (physical dimensions, mass, and acoustic noise output) below do not
conflict with any on-site conditions.
Physical dimensions
• Height :
Transport Position : 1265mm, 49.8 in
Normal Use Position : 1415mm - 1815mm, 55.7 in - 74.5 in
• Width:
Base Width : 490mm, 19.3 in
LCD Monitor Width : 545mm, 21.5 in
HDU Monitor Width : 565mm, 22.2 in
• Depth:
835mm, 32.9 in
• Weight:
Approx.73kg, 160.9 lbs (Without accessories)
Approx. 85kg, 187.4 lbs (Full configured)
Acoustic noise output
The acoustic noise output is less than 48 dB(A) at 20 degrees Celsius at a distance of 1 meter at all four
sides and 1 meter above the floor.