GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 5 Components and Functions (Theory) 5 - 7
5-4-2 LOGIQ Totus base load image and application software
LOGIQ Totus software consists of:
• Base load image
- Windows® 10 IoT Enterprise LTSC
- Contains all necessary drivers to support devices and peripherals approved for this product
• Application software
- Contains customized software to perform all functions and features for the LOGIQ Totus
Software location:
• Software resides in the SSD.
Drive partitions
Software installation:
• Software can be loaded/reloaded with USB media.
• System partition (Base+Application) can be reloaded from the Z partition.
• System partition (Base+Application) can be updated through a remote connection to the Service
Back Office.
Network capabilities:
• LAN is IPv6 ready.
• Can only be set up for IPv4 or IPv6. They cannot be mixed.
Table 5-2 Drive Partitions
Drive Type
Partition
Letter
Usage
GB
(approximately)
SSD
C: Windows 10/application 79
Z: Software Repository 40
D: User settings/configuration 32
E: Database/data 783 (1TB SSD)
V: Future Use 10
To Next Page
Loading...
Need help?
General
