GE Voluson i BT06 - Page 420

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
8-78 Section 8-20 - Replacement of the Voluson Station Components
8-20-17-5 Top Column Front Cover - Installation Procedure
1.) Place the new Top Column Front Cover and fasten it with the 4 screws.
2.) Mount the Bottom Column Back Cover as described in Section 8-20-15-5 on page 8-75.
3.) Mount the Top Column Back Cover as descibed in Section 8-20-14-5 on page 8-74.
4.) Mount the Top Shelf Bottom Rear Cover as described in Section 8-20-13-5 on page 8-73.
5.) Mount the Power Supply Cover as described in Section 8-20-11-5 on page 8-71.
6.) Mount the Top Shelf Additional Bottom Cover as described in Section 8-20-12-5 on page 8-72 or
mount the optional Probe Mux Box as described in Section 8-20-9-5 on page 8-69.
7.) Mount the optional Console Bottom Shelf as described in Section 8-20-8-5 on page 8-67.
8.) Mount the optional Cover BW Printer Shelf as described in Section 8-20-7-5 on page 8-66.
9.) Mount the optional Additional Shelf Peripherals as described in Section 8-20-6-5 on page 8-65