Inner malfunction information could see following table 2.
Table 2: ECU inner malfunction information indicating table
Schematic drawing for fast flash indicating light
Schematic drawing for “short, short, long and short” malfunction
If happening the situations above, it is necessary to turn off key switch of automobile at first, then turn on key
switch and start it again, if information hint could not be removed, it is necessary to change ECU.
Supplemental restraint system--Malfunction treatment
246
Number Malfunction type Fast flash type Remark
1 Electronic acceleration offset malfunction
Short, short, short and long
0001
2 Electronic acceleration self-checking malfunction
Short, short, long and short
0010
3 SCM inner RAM is wrong Short, short, long and long 0011
4 Inner parameter is wrong
Short, long, short and short
0100
5
Inner malfunction or acceleration storage space is full and ignition record has been made. Short, long, short and long
0101
6 Mechanical safety sensor happens malfunction
Short, long, long and short
0110
7 Increased pressure is wrong
Short, long, long and long
0111
8 Ignition driving function is wrong
Long, short, short and short
1000
9 Voltage of ignition voltage F12 and F13 is wrong
Long, short, short and long
1001
10 Other parts are wrong
Long, short, long and short
1010