Combination instrument assembly
Disassembly and assembly
1. Disassemble Combination instrument cover [68000077]
(a) Disassemble fixing clamp.
(b) Use screw driver to unclench three fixing clamps and four fixing clasps, then disassemble combination
penal cover.
î 347 î
Panel/combination instrument--Combination instrument assembly
2. Disassemble Combination instrument assembly
[68000081]
(a) Disassemble the screw.
(b) Liking that shown in figure, unclench two fixing clamps.
(c) Disassemble the joint, then disassemble Combination
instrument.
To Next Page
Loading...
