Panel/combination instrument-- panel
Code
Shape
Code
Shape
Code
Shape
<>
=4.8
=13
2204813
<>
=4.8
=19
2754819
<>
=6
=20
1740620
<>
=4.8
=9.5
2754895
<>
=6
=16
1400616
<>
=6
=20
1400620
Panel
Preparation
1. Automobile prepares to equip with SRS airbag and safety belt pre-tension crimper.
Parking disassembling and assembling works in this chapter might influence SRS airbag. Before imple-
menting these works, it is necessary to read the notes in SRS chapter.
Change
1. Schedule for bolt, screw and screw cap
Note: when using screw driver to unclench fixing clasp or fixing clamp, it is necessary to wrap
the needled top of wrench with adhesive tape.
Hint: when disassembling or assembling panel, if necessary, use the figure and code in following
table to choose bolt, screw and screw cap.
2. Preparation
3. Disassemble leading wire of battery cathode
4. Turn front wheel to face the front
340
mm
To Next Page
Loading...
Need help?
General
