使用说明书 Operation Instruction
10
1) 请充分注意不要让里盖和电气箱体把线咬坏，按
住里盖下侧A部关闭，再拧紧4根螺丝①。
2) 向下降低按压电气箱旁边的电缆线和按孔B的电缆
线压板C，按压电缆线，拧紧螺丝②。
1) Take care so that the cord is not caught between the rear
cover and the electrical box main body, close the rear cover
while pressing section A on the lower side of the rear cover,
and tighten four screws ①.
2) Lower downward the cord located on the side of the control
box and cord presser plate C in the push hole B, press the
cord and tighten screws ② .
①
②
B
C
钩部
clamp
①
②
①
①
③
②
电缆夹的固定方法
①轻轻地按压钩部的方块。
（听到喀喳的声音就固定好了）
How to lock cord clamp
① lightly press the corner of clamp.
(Cord clamp is locked with a click)
电缆夹的解开方法
① 一边轻轻的按住。
②一边下拉电线夹。
③再向上提电线夹。
How to remove the cord clamp
① lightly pressing
② pull down the clamp
③ the clamp goes up
①
To Next Page
Loading...
