Gemsy GEM1900A - 眼睛保护罩的安装 Installing the Eye Protection Cover; 线架装置的安装 Installing the Thread Stand

使用说明书 Operation Instruction
12
13.眼睛保护罩的安装 Installing the eye protection cover
请一定安装眼睛保护罩①后使用缝纫机。
Be sure to install and use eye protection cover ①.
为了保护断针飞起弄伤眼睛，请一定安装起来。
注意
CAUTION
Be sure to attach this cover to protect the eyes from the disperser of needle breakage.
14.线架装置的安装 Installing the thread stand
1) 安装线架装置，把它安装到机台右上的孔里。
2) 拧紧固定螺母①，不让线架装置松动。
3) 如果顶部可以配线时，请把电源线从线架杆②中
穿过。
1 Assemble the thread stand, and set it in the hole in the
top right corner of the machine table.
2) Tighten locknut to fix the thread stand.
3) When ceiling wiring is possible, pass the power canle
through spool rest rod②．
)
①
②
①