Gemsy GEM1900A - Combination of the Work Clamp Foot and the Feed Plate

5.布压脚、送布底板的组装 Combination of the work clamp foot and the feed plate
使用专用压脚时，请确认缝制图案的形状。
万一，压脚突出缝制图案，缝制途中机针就有碰到压脚，发生断针的危险。
注意
CAUTION
In case of using an exclusive work clamp foot, make sure of the shape of the Sewing pattern. It the
sewing pattern extends outside the work clamp foot, the needle interferes with the work clamp foot
during sewing, resulting in the danger of the needle breakage or the like.
压脚、送布底板请根据缝制条件适当地进行组合。标准出货和特别订货的组合如下表所示。
Make use of the appropriate combination of the work clamp foot and the feed plate in accordance with the sewing conditions.
The combination for the standard delivery and the special order is shown in the following table.
规格
Spec
LK-1 902A
标准
LK-1902A
Standard
大尺寸用
（特别定 制零件）
For larga stze
(Special order part)
大尺寸用
（特别定 制零件）
For excra large size
(Special order part)
布压脚
Feed plate
货号
Part No.
13544465
货号
Part No.
13545660
货号
Part No.
13547161
布压脚底 板
Work damp foot
货号
Part No.
14143002
货号
Part No.
13545504
货号
Part No.
13545801
货号
Part No.
13547005
使用说明书 Operation Instruction
69