Gemsy GEM1900A - Operations of P Pattern and C Pattern; Perform Sewing Using the Pattern Key（ ）24

Operation Instruction SC201(1900A/1903A)
24
45
76
2.5×4.4
46
42
2.5×4.4
47
91
8×8
48
99
8×8
49
148
8×8
50
164
8×8
51
49
17×10
52
67
20×20
53
21
8×8
54
32
26×15
55
41
25×25
56
39
19×15
57
47
24×15
58
63
32×20
59
124
10×10
60
85
10×12
2.5 Operations of P Pattern and C Pattern
2.5.1 Perform Sewing Using the Pattern Key
（ ）
Patterns (No.1 to 200) which have been already registered can be registered to P1 to P50. It is
possible to change and register the scale, max speed limitation, thread tension and sewing position.
Same as the patterns (No.1 to 200), P1 to P50 are used by the selection by scrolling the pattern
Nos. The pattern calling from P1 to P25 can be made by one-touch as well.
When selecting P6 to P25, perform the selection by combination (simultaneously pressing) of
keys as shown in the table below.
P-No.
Selection Key
P-No.
Selection Key
P-N
Selection Key
P-No.
Selection Key