使用说明书 Operation Instruction
Indication Function Setting range State when delivered remarks
Max. Sewing speed(speed can be set in a unit of
100 rpm)
400 to 3000 3000 For LK-1 900A. set to
2700.
Sewing speed of 1st stitch (with needle thread
clamp)(speed can be set in a unit of 100 rpm)
400 to 1500 1500
Sewing speed of 2nd stitch (with needle thread
clamp)(speed can be set in a unit of 100 rpm)
400 to 3000 3000
Sewing speed of 3rd stitch (with needle thread
clamp)(speed can be set in a unit of 100 rpm)
400 to 3000
3000
Sewing speed of 4th stitch (with needle thread
clamp)(speed can be set in a unit of 100 rpm)
400 to 3000 3000
Sewing speed of 5th stitch (with needle thread
clamp)(speed can be set in a unit of 100 rpm))
400 to 3000 3000
Thread tension of 1st stitch (with needle thread
clamp)
0 to 200 200
Thread tension at the time of thread trimming 0 to 200 0
Changeover timing of Thread tension at the time
of thread trimming
-6 to 4 0
Sewing speed of 1st stitch (without needle thread
clamp)(speed can be set in a unit of 100 rpm)
400 to 1500 400
Sewing speed of 2nd stitch (without needle
thread clamp)(speed can be set in a unit of 100
rpm)
400 to 3000 900
Sewing speed of 3rd stitch (without needle
thread clamp)(speed can be set in a unit of 100
rpm)
400 to 3000 3000
Sewing speed of 4th stitch (without needle thread
clamp)(speed can be set in a unit of 100 rpm)
400 to 3000 3000
Sewing speed of 5th stitch (without needle thread
clamp)(speed can be set in a unit of 100 rpm))
400 to 3000 3000
Sewing speed of 1st stitch (without needle thread
clamp)
0 to 200 0
Changeover timing of Thread tension at the
sewing start (without needle thread clamp)
-5 to 2 0
Setting whether or not indication
or change of pattern No., X/Y
scale rate and max. Speed
limitation is acceptable.
(Prevention of misapplication)
0 : Operative
1 : lnoperative
0
44
To Next Page
Loading...
