Grandstream Networks UCM6200 - Table 26: Global Policy Parameters->Localization; Figure 77: Global Policy Categories

P a g e | 99
UCM6200 Series User Manual
 Global Templates configuration has higher priority to Global Policy configuration.
Global Policy can be accessed in web GUI->PBX->Zero Config->Global Policy page. On the top of the
configuration table, users can select category in the "Options" dropdown list to quickly navigate to the category.
The categories are:
 Localization: configure display language, data and time.
 Phone Settings: configure dial plan, call features, NAT, call progress tones and etc.
 Contact List: configure LDAP and XML phonebook download.
 Maintenance: configure upgrading, web access, Telnet/SSH access and syslog.
 Network Settings: configure IP address, QoS and STUN settings.
 Customization: customize LCD screen wallpaper for the supported models.
Select the checkbox on the left of the parameter you would like to configure to active the dropdown list for this
parameter.
Figure 77: Global Policy Categories
The following tables list the Global Policy configuration parameters for the SIP end device.
Table 26: Global Policy Parameters->Localization
Language settings
Language
Select the LCD display language on the SIP end device.
Date and Time
Date Format
Configure the date display format on the SIP end device’s LCD.
Time Format
Configure the time display in 12-hour or 24-hour format on the SIP end device’s