Grandstream Networks UCM6200 - Figure 88: Modify Selected Devices - Different Models

P a g e | 118
UCM6200 Series User Manual
Figure 88: Modify Selected Devices - Different Models
-------------------------------------------------------------------------------------------------------------------------- ------------------
Note:
Performing batch operation will override all the existing device configuration on the page.
-------------------------------------------------------------------------------------------------------------------------- ------------------
After the above configurations, save the changes and go back to web UI->PBX->Zero Config->Zero Config
page. Users could then click on to send NOTIFY to the SIP end point device and trigger the provisioning
process. The device will start downloading the generated configuration file from the URL contained in the
NOTIFY message.