EasyManuals Logo

Grandstream Networks UCM6200 User Manual

Grandstream Networks UCM6200
338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
P a g e | 104
UCM6200 Series User Manual
detected. Users can select automatic upgrading by day, by week or by minute.
ï‚· By week
Once selected, specify the day of the week to check HTTP/TFTP server
for firmware upgrades or configuration files changes.
ï‚· By day
Once selected, specify the hour of the day to check the HTTP/TFTP server
for firmware upgrades or configuration files changes.
ï‚· By minute
Once selected, specify the interval X that the SIP end device will request
for new firmware every X minutes.
Firmware Upgrade Rule
Specify how firmware upgrading and provisioning request to be sent.
Web Access
Admin Password
Configure the administrator password for admin level login.
End-User Password
Configure the end-user password for the end user level login.
Web Access Mode
Select HTTP or HTTPS as the web access protocol.
Web Server Port
Configure the port for web access. The valid range is 1 to 65535.
Security
Disable Telnet/SSH
Enable Telnet/SSH access for the SIP end device. If the SIP end device
supports Telnet access, this option controls the Telnet access of the device; if
the SIP end device supports SSH access, this option controls the SSH access
of the device.
Syslog
Syslog Server
Configure the URL/IP address for the syslog server.
Syslog Level
Select the level of logging for syslog.
Send SIP Log
Configure whether the SIP log will be included in the syslog message.
Table 30: Global Policy Parameters->Network Settings
Basic Settings
IP Address
Configure how the SIP end device shall obtain the IP address. DHCP or PPPoE
can be selected.
ï‚· DHCP
Once selected, users can specify the Host Name (option 12) of the SIP end
device as DHCP client, and Vendor Class ID (option 60) used by the client
and server to exchange vendor class ID information.
ï‚· PPPoE
Once selected, users need specify the Account ID, Password and Service
Name for PPPoE.
Advanced Setting
Layer 3 QoS
Define the Layer 3 QoS parameter. This value is used for IP Precedence, Diff-

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks UCM6200 and is the answer not in the manual?

Grandstream Networks UCM6200 Specifications

General IconGeneral
BrandGrandstream Networks
ModelUCM6200
CategoryIP Phone
LanguageEnglish

Related product manuals