Grandstream Networks UCM6200 User Manual

P a g e | 132
UCM6200 Series User Manual
Require Call
Token
Configure to enable/disable requiring call token. If set to "Auto", it might lock out users
who depend on backward compatibility when peer authentication credentials are
shared between physical endpoints. The default setting is "Yes".
SRTP
Enable SRTP for the call. The default setting is disabled.
Fax Mode
Select Fax Mode. The default setting is “None”.
 None: Disable Fax. This is the default setting.
 Fax Detect: Fax signal from the user/trunk during the call can be detected and
the received Fax will be sent to the Email address configured for this extension.
If no Email address can be found for the user, the Fax will be sent to the default
Email address configured in Fax setting page under web UI->PBX->Internal
Options->Fax/T.38.
Strategy
This option controls how the extension can be used on devices within different types
of network.
 Allow All
Device in any network can register this extension.
 Local Subnet Only
Only the user in specific subnet can register this extension. Up to three subnet
addresses can be specified.
 A Specific IP Address
Only the device on the specific IP address can register this extension.
The default setting is "Allow All".
Codec Preference
Select audio and video codec for the extension. The available codecs are: PCMU,
PCMA, GSM, AAL2-G.726-32, G,726, G.722, G.729, G.723, iLBC, ADPCM, H.264,
H.263, H.263p and VP8.
Table 40: IAX Extension Configuration Parameters->Features
Call Transfer
Call Forward
Unconditional
Configure the Call Forward Unconditional target number. If not configured, the Call
Forward Unconditional feature is deactivated.
The default setting is deactivated.
CFU Time
Condition
Select time condition for Call Forward Unconditional. CFU takes effect only during the
selected time condition. The available time conditions are “Office Time”, “Out of Office
Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday” and “Specific”.
Note:
 “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
 Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
 Office Time and Holiday could be configured on page Settings->Time Settings-
>Office Time/Holiday page.

Grandstream Networks UCM6200 Specifications

General

Brand	Grandstream Networks
Model	UCM6200
Category	IP Phone
Language	English