Grandstream Networks UCM6200 - Inbound Routes; Inbound Rule Configurations; Table 61: Inbound Rule Configuration Parameters; Figure 118: Country Codes

P a g e | 183
UCM6200 Series User Manual
Figure 118: Country Codes
Inbound Routes
Inbound routes can be configured via Web GUI->PBX->Basic/Call Routes->Inbound Routes.
 Click on "Create New Inbound Rule" to add a new inbound route.
 Click on "Blacklist" to configure blacklist for all inbound routes.
 Click on to edit the inbound route.
 Click on to delete the inbound route.
Inbound Rule Configurations
Table 61: Inbound Rule Configuration Parameters