SYSTEM SETTINGS
This section explains configurations for system-wide parameters on the UCM6200. System settings are under
“Settings” tag on UCM6200 web GUI. System settings include User Management, Network Settings, Firewall,
Change Password, LDAP server, HTTP server, Email settings, Time Settings, NTP Server, Recordings Storage
and Login Timeout settings.
User Management
User management is on web GUI->Settings->User Management page. User could create multiple accounts for
different administrators to log in the UCM6200 web GUI. Additionally, the system will automatically create user
accounts along with creating new extensions for extension users to login to the web UI using their extension
number and password. All existing user accounts for web UI login will be displayed on User Management page
as shown in the following figure.
Figure 10: User Management Page Display
User Information
When logged in as Super Admin, click on to create a new account for web UI user. The
following dialog will prompt. Configure the parameters as shown in below table.
To Next Page
Loading...
Need help?
General
