Grandstream Networks UCM6200 - Sample Application; Figure 89: Device List in Zero Config

P a g e | 119
UCM6200 Series User Manual
Figure 89: Device List in Zero Config
In this web page, users can also click on “Reset All Extensions” to reset the extensions of all the devices.
Sample Application
Assuming in a small business office where there are 8 GXP2140 phones used by customer support and 1
GXV3275 phone used by customer support supervisor. 3 of the 8 customer support members speak Spanish
and the rest speak English. We could deploy the following configurations to provisioning the office phones for
the customer support team.
1. Go to web GUI->PBX->Zero Config->Zero Config Settings, select “Enable Zero Config”.
2. Go to web GUI->PBX->Zero Config->Global Policy, configure Date Format, Time Format and Firmware
Source as follows.