Grandstream Networks UCM6200 - Figure 79: Edit Model Template

P a g e | 109
UCM6200 Series User Manual
Once added, the option will be shown in the list below. On the left side of each option, users can click on
to remove this option from the model template. On the right side of each option, users can click on to
reset the option to the default value.
User could also click on “Add New Field” to add a P value number and the value to the configuration. The
following figure shows setting P value “P1362” to “en”, which means the display language on the LCD is set
to English. For P value information of different models, please refer to configuration template here
http://www.grandstream.com/support/tools.
Figure 79: Edit Model Template
 Click on Save when done. The model template will be displayed on web UI->PBX->Zero Config->Model
Templates page.