Grandstream Networks UCM6200 - Time Settings; Auto Time Updating; Table 21: Email Log; Figure 58: Email Logs

P a g e | 81
UCM6200 Series User Manual
Table 21: Email Log
Field
Description
Start Time
Enter the start time for filter
End Time
Enter the end time for filter
Receivers
Enter the email recipient, while searching for multiple recipients, please
separate then with comma and no spaces.
Send Result
Enter the status of the send result to filter with
Return Code
Enter the email code to filter with
Email Send Module
Select the email module to filter with from the drop down list, which
contains:
All Modules
Extension
Voicemail
Conference Schedule
User Password
Alert Events
CDR
Fax
Test
Email logs will be shown on bottom of The “Email Send Log” page, as shown on the following figure.
Figure 58: Email Logs
Time settings
Auto time updating
The current system time on the UCM6200 is displayed on the upper right of the web page. It can also be found
under Web GUI->Status->System Status->General.
To configure the UCM6200 to update time automatically, go to Web GUI->Settings->Time Settings->Time Auto
Updating.