Grandstream Networks UCM6200 - Figure 90: Zero Config Sample - Global Policy

P a g e | 120
UCM6200 Series User Manual
Figure 90: Zero Config Sample - Global Policy
3. Go to web GUI->PBX->Zero Config->Model Templates, create a new model template “English Support
Template” for GXP2140. Add option “Language” and set it to “English”. Then select the option “Default Model
Template” to make it the default model template.
4. Go to web GUI->PBX->Zero Config->Model Templates, create another model template “Spanish Support
Template” for GXP2140. Add option “Language” and set it to “Español”.
5. After 9 devices are powered up and connected to the LAN network, use “Auto Discover” function or “Create
New Device” function to add the devices to the device list on web UI->PBX->Zero Config->Zero Config.
6. On web GUI->PBX->Zero Config->Zero Config page, users could identify the devices by their MAC
addresses or IP addresses displayed on the list. Click on to edit the device settings.