Grandstream Networks UCM6200 - Mini Bar; Table 102: Create New Mini Bar; Figure 194: Create New Mini Bar

P a g e | 290
UCM6200 Series User Manual
Mini Bar
In order to create a new mini bar, click on under UCM webGUI -> PBX -> PMS ->
Mini Bar, the following window will pop up :
Figure 194: Create New Mini Bar
Table 102: Create New Mini Bar
Code
Enter a non-existing extension number to be dialed when
using the mini bar feature.
Name
Enter a name for the mini bar.
Prompt
Select the Prompt to play once connected to the mini bar.
Skip Maid and Password
Authentication
If enabled, the default maid code will be 0000, no
authentication is required.(enter 0000 followed by # to access
the consumer goods)
Enable Continuous Multi Goods
Billing
If enabled, please separate the goods’ codes by*.
In order to create a new maid, click on under UCM webGUI -> PBX -> PMS -> Mini
Bar, the following window will popup.