UCM6200 Series User Manual
If enabled, a brief introduction (received time, received from, and etc) of each
message will be played when accessed from the voicemail application. The
default setting is "Yes".
If enabled, UCM will play from the voice message left most recently; if disabled,
UCM will play from the earliest left voice message
If enabled, users can review the message following the IVR before sending the
message out. The default setting is "No".
Access Voicemail
If the voicemail is enabled for UCM6200 extensions, the users can dial the voicemail access feature code (by
default *98 or *97) to access the extension’s voicemail. The users will be prompt to enter the voicemail password
and then can enter digits from the phone keypad to navigate in the IVR menu for different options.
Table 68: Voicemail IVR Menu
2 - Call the person who sent this message
3 - Hear the message envelop
* - Return to the main menu
5 - Repeat the current message
8 - Forward the message to
another user
To Next Page
Loading...
Need help?
General
