Grandstream Networks UCM6200 User Manual

P a g e | 242
UCM6200 Series User Manual
DISA
In many situations the user will find the need to access his own IP PBX resources but he is not physically near
one of his extensions. However, he does have access to his own cell phone. In this case we can use what is
commonly known as DISA (Direct Inward System Access). Under this scenario the user will be able to call from
the outside, whether it’s using his cell phone, pay phone, regular PSTN, etc. After calling into UCM6200, the
user can then dial out via the SIP trunk or PSTN trunk connected to UCM6200 as it is an internal extension.
The UCM6200 supports DISA to be used in IVR or inbound route. Before using it, create new DISA under web
GUI->Call Features->DISA.
 Click on "Create New IVR" to add a new DISA.
 Click on to edit the DISA configuration.
 Click on to delete the DISA.
Figure 162: Create New DISA
Table 77: DISA Settings
Name
Configure DISA name to identify the DISA.
Password
Configure the password (digit only) required for the user to enter before using DISA
to dial out.
Note:
The password has to be at least 4 digits.
Permission
Configure the permission level for DISA. The available permissions are "Internal",
"Local", "National" and "International" from the lowest level to the highest level.

Grandstream Networks UCM6200 Specifications

General

Brand	Grandstream Networks
Model	UCM6200
Category	IP Phone
Language	English