GRAPHTEC CE6000-120AP - Page 68

2-39
Supplement
It will return to default screen without changing
the settings when you press the [CONDITION]
key.
2 Press the POSITION ( ) key.
CONDITION screen (2/3) is displayed.
3 Press the [2] key (CUT LINE PATTERN).
CUT LINE PATTERN setting screen is displayed.
4 Press the [1] key (Condition No.).
CONDITION No. selection screen is displayed.
5 Press the POSITION ( ) key and select the CONDITION
No.
6 Confirm the setting value, and press the POSITION ( ) key
(PREVIOUS).
CONDITION No. is selected and return to CUT LINE PATTERN setting
screen.
7 Press the [2] key (TYPE No.).
TYPE No. setting screen is displayed.
8 Press the POSITION ( ) key and select the TYPE No.