2-51
Supplement
Match it to the software you are using.
Press the POSITION ( ) key (PREVIOUS) to
return to the RS-232C setting screen without
changing any settings.
The Enq/Ack settings are available for HP-
GL. Even if Enq/Ack is set for GP-GL, it is set
to HARDWIRE.
12 Press [1] key (HARDWIRE), [2] key (X on/off), or [3] key (Enq/
Ack).
The handshake is selected and it will return to RS-232C setting screen.
13 Confirm the settings and press the [ENTER] key (SET).
Setting will be set, and it will return to MEDIA setting screen.
14 Press [PAUSE/MENU] key.
It will return to default screen.
To Next Page
Loading...
