GRAPHTEC FC8000-75 - Page 107

FC8000-UM-251-9370 8-13
8. TROUBLESHOOTING
Error
code
Error Display Cause Solution
E04024
E04024 ARMS
MARK SCAN ERROR!
MARK SENSOR LEVEL
WAS NOT ENOUGH
Registrationmarkwasnot
detected.
Readjustthesensorlevel.
Changethecolorofthe
registrationmark.
Checkthemedia.
Checktheprintpositionofthe
registrationmark.
E04025
E04025 ARMS
MARK SCAN ERROR!
MARK WAS NOT FOUND
IN HIGH SPEED MODE
Registrationmarkwasnot
detected.
Readjustthesensorlevel.
Changethecolorofthe
registrationmark.
Checkthemedia.
Checktheprintpositionofthe
registrationmark.