GRAPHTEC FC8600 SERIES - Page 98

4-14
4-15
When the mirror is set to on, copy is performed in the following order.
The registration mark scan data cannot be copied.
When the coordinate values rotation is set to on, copy is performed in the following order.
The registration mark scan data cannot be copied.
Operation
1
Create one data you want to copy.
Cutting data is stored in the buffer memory.
2
Press the POSITION (
▲▼◄►
) key and move the tool carriage
to the position to copy.
POSITION
Second copy
First copy
Third copy
Origin point
Copy origin
point
Cross cut
space
Cross cut
space
Copy
space
Copy
space
Cross cut
space
Media is cross cut at this position.
Second copy
First copy
Third copy
Origin point
Copy origin
point
Cross cut
space
Cross cut
space
Copy
space
Copy
space
Cross cut
space
Media is cross cut at this position.
Next page