BASIC OPERATION
121
Preset
The Preset function loads either factory default states or the user-
defined states – depending on the Preset configuration settings.
 Using the Preset Key → from page 121
 Save the User Preset Settings→ from page 121
 Preset Type Settings→ from page 122
 Power on Preset Settings → from page 122
Using the Preset Key
key loads the factory default state or
user-defined preset settings. See the Preset
Type Settings on page 121 to set the type of
preset settings that are loaded.
The factory default settings are listed on page
285
to load the preset settings.
Save the User Preset Settings
The user-defined preset settings can be created
by saving the current state as the user-defined
preset settings.
>Pwr On/Preset[F5]>Save User
Preset[F3] to save the current state as the User
Preset settings.
To Next Page
Loading...
Need help?
General
