GW Instek GSP-9300 - System Settings; System Information; Error Messages

BASIC OPERATION
117
System Settings
System Information
Description
The System Information displays the following:
Serial Number
Installed Options
Version:
Calibration Date:
Software
LOI
Firmware
RF
File sys
TG
RF
DNS Hostname
TG
MAC Address
DSP
LXI Password
Wordlist
Core
Operation
1. Press
System
>System Information[F1] to bring up
a list of the system information.
Error Messages
Description
You can view error messages that are in the
error queue by message number, description
and time. All errors from the system error
queue are logged when operating the analyzer.
For a list of the error messages, please see the
programming manual.
Operation
1. Press
System
>Error message[F2] to bring up the
error message table.
2. Press Prev Page[F2] and Next Page[F3] to
navigate through each page of the error list.