GSP-9300 User Manual
58
2. Press Correction[F2] and toggle correction on.
> More[F7]>Correction[F3]>
Correction[F2] to turn correction back off.
Delete Correction Set
> More[F7]>Correction[F3]>
Correction Set[F1] and choose the correction set
to delete.
2. Press Delete Correction[F6].
The selected correction set will be deleted.
Save Correction Set to Memory
> Save To[F1] and choose the save
location.
2. Press Type[F2]> Correction[F5].
3. Press Data Source[F3] and choose a correction.
4. To name the file, press Name[F5].
Name the selected file using the
F1~F7 keys, as shown below or use
the numeric keypad to enter
numbers.
To Next Page
Loading...
Need help?
General
