ADVANCED OPERATION
203
EMI Test
The EMI Test function is used to greatly
simplify the process of EMI pretesting for
radiated or conductive emissions testing. You
only need to specify the testing frequency,
standard used and any corrective factors.
In addition, the peak table function can be used
and the results can be shown logarithmically.
Note the following instructions assume that you
are familiar with how to conduct a radiated or
conducted emissions test and are familiar with the
various emissions standards.
Generally speaking, EMI testing is split into 4
different tests: radiated emissions, radiated
immunity, conducted emissions and conducted
immunity tests. The EMI test function is primarily
concerned with radiated emissions and to a lesser
extent, conducted emissions.
To Next Page
Loading...
