GW Instek GSP-9300 - Page 144

GSP-9300 User Manual
142
Carr. Offset[F2]
If the measured carrier
offset is above this limit,
it will be judged as Fail.
Carr. Power[F3]
If the measured carrier
power is above this limit,
it will be judged as Fail.
2. Press Pass/Fail[F6] and turn Pass/Fail on.
3. The FM Measurement area in the bottom half of
the screen will now include Pass/Fail indicators
for the FM deviaton, carrier offset and carrier
power.
Pass:
Fail:
Example
Pass/Fail
judgments