GW Instek GSP-9300 User Manual

ADVANCED OPERATION
161
Phase jitter measurements
Start
offset
Stop
offset
3. Press Start Offset[F2] to set the start offset:
Offset:
(0Hz ~ ½ span freq)
4. Press Stop Offset[F3] to set the stop offset:
Offset:
(0Hz ~ ½ span freq)
Note
The phase jitter measurements are strongly tied to
the RBW and VBW.

GW Instek GSP-9300 Specifications

General

Brand	GW Instek
Model	GSP-9300
Category	Measuring Instruments
Language	English