GW Instek GSP-9300 - Page 182

GSP-9300 User Manual
180
Add.limits[F4]
Selects the operating
bands for FDD
duplexing:
None
BandII
BandIV
BandV
BandX
BandX11
BandXIII
BandXIV
MinOffset/
Limit Value[F5]
Allows you to view the
parameters of each of the
offsets, including
start/stop frequency,
RBW, Abs Start/Stop
and Rel Start/Stop.
Pre-Set Test
Parameters:
802.XX
For details on 802.11x and 802.16 SEM test
parameters, please see the SEM overview on
page 162
1. Press Setup[F1]>and choose a 802.XX test:
802.11b[F2]
802.11g[F3]
802.11n[F4]
802.16[F5]
2. Press Ref. Channel[F2] to view the predefined
settings for channel integrated bandwidth,
channel span, RBW and PSD ref.