GW Instek GSP-9300 User Manual

GSP-9300 User Manual
28
Power UP
Steps
1. Insert the AC power cord into the power
socket.
2. The power button exterior will be lit blue to
indicate that the GSP-9300 is in standby mode.
3. Press the power button for a few seconds to
turn the GSP-9300 on.
4. The power button will turn orange and the
GSP-9300 will start to boot up.
Note
It takes a little less than 1 minute for the GSP-9300
to fully startup.

GW Instek GSP-9300 Specifications

General

Brand	GW Instek
Model	GSP-9300
Category	Measuring Instruments
Language	English